|
This guide points you to key information and publications about Software
Development Environments (SDE), Configuration Management (CM), and Computer
Aided Software Engineering (CASE). Some documents were published by the SEI,
while others were published externally and authored by SEI personnel. Though
not all-inclusive, the guide presents a significant cross section of
information sources from industry and government. Included are pointers to
publications, such as technical reports, newsletters, directories, and
magazines. Also referenced are consulting firms, databases, user's groups, and
trade shows. Contact or order information is provided for all sources. Pricing
information is given where available.
Information from the SEI
Technical Reports on Software Development Environments and Configuration
Management
1. Weiderman, N.H.; Habermann, A.N.; Borger, M.; Klein, M.; Landherrs, S.;
Smeaton, R.; D'Ippolito; Kochmar, J.; Sun, A., Evaluation of Ada
Environments, CMU/SEI-87-TR-1, Software Engineering Institute, Carnegie
Mellon University, April 1987 (ADA180905).
2. Feiler, P. H., Relationship between IDL and Structure Editor Generation
Technology, SEI/CMU-86-TR-13,Software Engineering Institute, Carnegie
Mellon University, 1987 (ADA1819137).
3. Feiler, P.H. and Kaiser, G., Granularity Issues in Marvel, a
Knowledge-Based Programming Environment, CMU/SEI-86-TM-11, Software
Engineering Institute, Carnegie Mellon University, 1987 (ADA182981).
4. Feiler, P.H. and Smeaton, R., The Project Management Experiment,
CMU/SEI-88-TR-7, Software Engineering Institute, Carnegie Mellon University,
June 1987 (ADA197490).
5. Graham, M. and Miller, D., ISTAR Evaluation, CMU/SEI-88-TR-3,
Software Engineering Institute, Carnegie Mellon University, March 1988
(ADA201345).
6. Feiler, P.H. and Smeaton, R., Managing Development of Very Large Systems:
Implications on Integrated Environments, CMU/SEI-88-TR-11, Software
Engineering Institute, Carnegie Mellon University, May 1988 (ADA197671).
7. Dart, S.; Ellison, R.; Feiler, P.H.; Habermann, A.N., Software
Development Environments, CMU/SEI-87-TR-24, Software Engineering Institute,
Carnegie Mellon University, 1987 (ADA200542).
8. Feiler, P.H.; Dart, S.; Downey, G., Evaluation of the Rational Evaluation
Environment, CMU/SEI-88-TR-15, Software Engineering Institute, Carnegie
Mellon University, July 1988 (ADA198934).
9. Downey, G.; Bassman, M.; Dahlke, C., Experiment Transcripts for the
Evaluation of the Rational Environment, CMU/SEI-88-TR-21, Software
Engineering Institute, Carnegie Mellon University, July 1988 (ADA204634).
10. Dart, S., A Spectrum of Functionality in Configuration Management
Systems, CMU/SEI-90-TR-11, Software Engineering Institute, Carnegie Mellon
University, December 1990 (ADA235753).
11. Feiler, P.H., Configuration Management Models in Commercial
Environments, CMU/SEI-91-TR-7, Software Engineering Institute, Carnegie
Mellon University, April 1991 (ADA2357582).
12. Feiler, P.H. and Downey, G., Tool Version Management Technology: A Case
Study, CMU/SEI-90-TR-SEI-90-TR-25, Software Engineering Institute, Carnegie
Mellon University, November 1990 (ADA235639).
13. Feiler, P.H. and Downey, G., Transaction-Oriented Configuration
Management: A Case Study, CMU/SEI-90-TR-23, Software Engineering Institute,
Carnegie Mellon University, November 1990 (ADA235510).
14. Wallnau, K.C., Tool Integration and Environment Architectures,
CMU/SEI-91-TR-11, Software Engineering Institute, Carnegie Mellon University,
May 1991, (ADA240851).
15. Morris, E.; Feiler, P.H.; Smith, D., Case Studies in Environment
Integration, CMU/SEI-91-TR-13, Software Engineering Institute, Carnegie
Mellon University, July 1991.
16. Brown, A.; Feiler, P.H.; Wallnau, K., Past and Future Models of CASE
Integration, pending, Software Engineering Institute, Carnegie Mellon
University.
17. Brown, A., A Critical Reviews of the Current State of IPSE
Technology, CMU/SEI-91-TR-29, Software Engineering Institute, Carnegie
Mellon University, October 1991.
18. Brown, A.; Feiler, P.H.; Wallnau, K., Understanding Integration in a
Software Development Environment, pending, Software Engineering Institute,
Carnegie Mellon University.
Technical Reports on CASE
1. Zarrella, P., CASE Tool Integration and Standardization,
CMU/SEI-90-TR-14, Software Engineering Institute, Carnegie Mellon University,
December 1990 (ADA235640).
2. Zarrella, P.; Smith, D; Morris, E., Issues in Tool Acquisition,
CMU/SEI-91-TR-8, Software Engineering Institute, Carnegie Mellon University,
March, 1991.
3. Morris, E; Feiler, P.; Smith, D., Case Studies in Environment
Integration, CMU/SEI-91-TR-13, Software Engineering Institute, Carnegie
Mellon University, July 1991.
4. Firth, R.; Mosley, V.; Pethia, R.; Roberts Gold, L.; Wood, W., A Guide to
the Classification and Assessment of Software Engineering Tools,
CMU/SEI-87-TR-10, Software Engineering Institute, Carnegie Mellon University,
1987 (ADA213968).
5. Humphrey, W., CASE Planning and the Software Process,
CMU/SEI-89-TR-26, Software Engineering Institute, Carnegie Mellon University,
1989 (ADA 219066).
Proceedings from the SEI about CASE
The CASE Technology Project has held two workshops. The proceedings from
the first workshop are listed below. The proceedings from the second workshop,
which focuses on CASE management issues, are forthcoming.
1. Huff, C.; Morris, E.; Smith, D.; Stepien, K.; Zarrella, P., Proceedings
of the CASE Adoption Workshop, CMU/SEI-91-TR-14, Software Engineering
Institute, Carnegie Mellon University, pending approval end of 1991.
Other SEI Publications for Software Development Environments
1. "Configuration Management: State of the Art," SEI
Bridge, March 1990.
Other SEI Publications for CASE
1. "There is no best CASE," SEI Bridge, Software
Engineering Institute, Carnegie Mellon University, March 1991.
2. "Tools Within Software Engineering Practice," SEI Technical Review,
pp 11-22, 1989.
How to Order SEI Technical Reports
Technical reports that have a DTIC number (for example, the DTIC number
for the SEI report CASE Tool Standardization and Integration is
ADA235640) are available from the Defense Technical Information Center (DTIC)
and the National Information Service (NTIS). To request a copy of any of the
above reports, please contact either DTIC or NTIS directly.
Defense Technical Information Center (DTIC)
ATTN: FDRA Cameron Station
Alexandria, VA 22304-6145
National Technical Information Service (NTIS)
U.S. Department of Commerce
Springfield, VA 22161
If a report is not available through DTIC or NTIS, please contact the SEI at
the address listed below. SEI affiliates and government organizations may order
documents directly from the SEI. Copies of SEI reports may be obtained by
submitting a written request, accompanied by a mailing label with your return
address to:
Software Engineering Institute
ATTN: Publications Requests
Carnegie Mellon University
Pittsburgh, PA 15213-3890
Externally Published Authored by SEI Personnel on Environments and
Configuration Management
Below are references to various journals, books, and proceedings from
conferences and workshops that involved project personnel.
1. Kaiser, G. E.; Feiler, P. H.," Intelligent Assistance without Artificial
Intelligence," Proceedings of Thirty-Second IEEE Computer Society
International Conference (COMPCON), San Francisco, CA, February 1987, pp.
236-241.
2. Kaiser, G.E.; Feiler, P. H., "An Architecture for Intelligent Assistance in
Software Development," Proceedings of 9th International Conference on
Software Engineering, Monterey, CA, March 1987.
3. Kaiser, G.E.' Feiler, P. H," Intelligent Assistance for Software Development
and Maintenance," IEEE Software, May 1988.
4. Kaiser, G.E.; Barghouti, N.S.; Feiler, P. H.; Schwanke, R. W., "Database
Support for Knowledge-Based Engineering Environments," IEEE Expert, May
1988.
5. Dart, S. A.; Druffel, L., "Software Development Environments," American
Institute of Aeronautics and Aerospace (AIAA), Progress Series on Aerospace
Software Engineering, pp 203-227,1991.
6. Dart, S.; Feiler, P. H., "Configuration Management in CASE Tools and
Environments," Third International Workshop on Computer-Aided Software
Engineering (CASE 89), IEEE Computer Society, July 1989.
7. Feiler, P. H., "Software Configuration Management: Advances in Software
Development Environments," Tutorial Presentation at 12th International
Conference on Software Engineering (ICSE 12) in Nice, France, March 1990.
8. Dart, S. A., "Concepts in Configuration Management Systems," Third
International Software Configuration Management Workshop, Norway, ACM
Press, pp 1-18, June 1991.
9. Feiler, P. H.; Smeaton, R.," Managing Development of Very Large Systems:
Implications on Integrated Environments," Proceedings of International
Workshop on Software Version and Configuration Control,
Teubner Verlat, German Chapter ACM, GI Siemens AG, Grassau, W-Germany, January
1988.
10. Feiler, P. H., "Software Process Support through Software Configuration
Management," Fifth International Software Process Workshop, ACM Press,
October 1989.
11. Feiler, P. H., "Software Process Support in Software Development
Environments," Sixth International Software Process Workshop, ACM Press,
October 1990.
12. Dart, S. A.," Tool Configuration Assistant," Second International
Software Configuration Management Workshop, ACM SIGSOFT Software
Engineering Notes, pp 110-113, October 1989.
13. Dart, S. A., "Tool Configuration and Installation Assistant,"
Proceedings of the USENIX Workshop on Software Management, April 1989.
14. Dart, S. A., "Software Development Environments from a User's
Perspective," Fifth Annual National Joint Conference on Quality and
Productivity, pp 92-104, Alexandria VA, February 1989.
15. Dart, S.A., "Concepts in Configuration Management Systems," Third
International Software Configuration Management Workshop, June 1991.
16. Dart, S.A.," Configuration Management in Computer Aided Design Systems,"
Third International Software Configuration Management Workshop, June
1991.
17. Brown, A.; Feiler, P.H.; Wallnau, K., "Understanding Integration in
a Software Development Environment," Systems Integration Conference,
pending publication.
18. Dart, S.A. and Feiler, P.H., "State of the Art in Environment Support for
Configuration Management," Tutorial Notes at the 13th International
Conference on Software Engineering (ICSE), Texas, May 1991.
19. Weiderman,N.; Habermann, A.N.; Borger, M.; Klein, M.; "A Methodology
for Evaluating Environments," Sigplan Notices, Vol 22, No. 1, January
1987.
20. Smith, D. and Oman, P., "Software Tools in Context," IEEE Software,
pp 14-20, May 1990.
Information from Government and Industry Sources on CASE
The following tables provide a useful set of pointers to a number of different
sources of information.
Table 1 - U.S. Government CASE Information
(14K)
Table 2 - CASE Industry Specific Reports/Directories
(18K)
Table 3 - General Software Industry Reports/Directories
(6K)
Table 4 - Consulting Groups/Conferences
(7K)
Table 5 - CASE Industry Newsletters
(8K)
Table 6 - CASE Trade Shows
(5K)
Table 7 - CASE User's Groups
(4K)
If you want more information contact Customer Relations.
The Software
Engineering Institute (SEI) is a federally funded research and
development center sponsored by the U.S. Department of Defense
and operated by Carnegie Mellon University.
Copyright
2007
by Carnegie Mellon University
Terms of Use
URL: http://www.sei.cmu.edu/legacy/scm/bib/case_env_guide.html
Last Modified: 11 January 2007
|
